1.3 Inch OLED Display White Characters 128x64 Dots SH1106 30PIN FPC Connector
Technology:
Organic materials emit light when electricity passes through them. Each pixel in an OLED display is an individual light-emitting diode, allowing for full control over the brightness and color of each pixel.
Self-emissive: OLED does not require a backlight, which means each pixel generates its light.
Advantages:
Higher contrast: Since OLED pixels can turn off completely, they produce true black and very high contrast ratios.
Excellent brightness: OLED displays can achieve higher contrast levels without requiring excessive brightness since black is truly black (no backlight bleeding).
Deep blacks: The ability to control the brightness of individual pixels results in perfect black levels.
Detailed Parameters:
| 1 | Brand Name | Genyu |
| 2 | Model Number | GY12864-44 |
| 3 | Display Mode | OLED(Organic Light Emitting Diode) |
| 4 | Color | White |
| 5 | Size | 1.3 inch |
| 6 | Dot Matrix | 128*64 Pixels |
| 7 | Module Size | 34.5(W)x23.0(H)x1.427(D) mm |
| 8 | View Area | 31.42 (W) x 16.7(H) mm |
| 9 | Active Area | 29.42(W) x14.7(H) mm |
| 10 | Dot Size | 0.21(W)*0.21(H) mm |
| 11 | Dot Pitch | 0.23(W)*0.23(H) mm |
| 12 | Drive IC | SH1106 |
| 13 | Interface | 6800/8080 interface, 4 wire serial interface, I2C |
| 14 | FPC Connector | 30PIN, socket type |
| 15 | FPC Length | 40 mm |
| 16 | FPC Pitch | 0.5 mm |
| 17 | Voltage | VDD=1.65~3.3V, Vin=3.5~4.2V |
| 18 | Viewing Angle | 160° |
OLED Screens ( 0.42 inch~3.12 inch ):
We mainly develop small-middle sizes OLED displays, including 0.42", 0.49", 0.66", 0.78", 0.87", 0.91", 0.96", 1.12", 1.21", 1.3", 1.5", 1.54", 1.92", 2.08", 2.23", 2.42", 2.7", and 3.12", etc.
We can customize the FPC, Interface, Touch Panel, and PCB board based on your demands.
Power Considerations:
- Most 1.3-inch OLED displays can run on either 3.3V or 5V (depending on the display version). However, if you're using a microcontroller like the ESP32, make sure to power the OLED display with a voltage that matches its requirement (3.3V for some displays).
OLED vs LCD: A Comparison
| Features | OLED | LCD |
| Contrast | Excellent (true blacks) | Lower contrast (grayish blacks) |
| Color Accuracy | Vibrant and accurate | Good, but less vivid |
| Viewing Angles | Wide and consistent | Limited (improves with IPS) |
| Brightness | Excellent, but lower for dark images | Usually high, but power-hungry |
| Power Consumption | Efficient for dark content | Higher power consumption overall |
| Thickness | Thinner and more flexible | Thicker and rigid |
| Burn-in Issues | Risk of burn-in | No burn-in |
| Lifespan | Shorter lifespan due to degradation | Longer lifespan |
| Cost | Expensive | More affordable |
| Durability | Prone to damage and burn-in | More durable |
FAQ
1. Q: What products can you provide?
A. 1) Custom Segment LCD Display;
2) Monochrome Graphic/Dot Matrix LCD Display Modules;
3) Micro OLED Display Modules;
4) Color TFT LCD Display Panels;
5) LED Backlights.
2. Q: Where is your factory?
A. Our office is in Shenzhen, Guangdong and our factory is in Jiangxi Province.
3. Q: Will you offer a free sample?
A: For the first cooperation, samples will be charged, and the amount will be returned at the mass order stage.
4. Q: What is the delivery time?
A: For small orders: 7-15 days. For mass production: 25-30 days.
5. Q: Can I get a lower price for OLED displays?
A: Yes, cheaper price with bigger/larger quantities order.
6. Q: How do you control the quality of products?
A: All products are 100% inspected before shipment.
